Thingiverse
Macbook USB-C plug holder
by iviar
3
Downloads
3
Likes
0
Makes
As you know MacBook has only one USB-C connector, used both for power supply and usb device such as external SSD, is can be quite disappointing to have this plug slip off.
So I designed an holder for the usb plug.
The file macbook-usbc-hold-narrow.stl is preferable, it is 0.6mm thick and the hook is narrow and longer to better grab the MacBook
Be CAREFUL NOT TO CLOSE THE LAPTOP SCREEN with the holder inserted.
v2 (macbook-usbc-hold-v2.stl) works under and permits to close the monitor, specifically designed for MacBook early 2015 model and seems might work with next (tiny) Macbook models too, as they looks the same (but I didn't try). As v2 is wider than the llaptop, you might need a large print bad or rotate 45 degree to print it.
Support not required.
So I designed an holder for the usb plug.
The file macbook-usbc-hold-narrow.stl is preferable, it is 0.6mm thick and the hook is narrow and longer to better grab the MacBook
Be CAREFUL NOT TO CLOSE THE LAPTOP SCREEN with the holder inserted.
v2 (macbook-usbc-hold-v2.stl) works under and permits to close the monitor, specifically designed for MacBook early 2015 model and seems might work with next (tiny) Macbook models too, as they looks the same (but I didn't try). As v2 is wider than the llaptop, you might need a large print bad or rotate 45 degree to print it.
Support not required.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
