Maceta Minimalista

Two-piece self-watering planter, designed from scratch. The top piece has a soil cavity, drainage holes, and a rear channel for filling the lower reservoir without lifting the planter.

Print settings

- Material: PETG recommended; PLA works for indoor use.

- Layer height: 0.16-0.24 mm

- Nozzle: 0.4 mm

- Walls/perimeters: 3 minimum, 4 recommended for the reservoir

- Infill: 12-20%

- Supports: No

- Orientation: Print both pieces with their bases flat on the print bed.