Macro ringflash softbox diffuser for Pentax AF160FC

EDIT 6/6/18 -
Added file: Camera Mount V2 - Has a groove to allow the D-ring tripod screw to be fixed to the mount with an E-clip
Added files: Large Diffuser Lid Part A and B - Simple Lid to fit the larger diffuser housing only, two piece design that needs to be glued together.

In addition to the 3D files here you'll need:
5x M10x~25mm screws for the larger diffuser, I used Nylon.
Or: 3xM10x~25mm screws for the smaller housing.
1x 1/4" D-ring tripod screw.

I've included file for printable M10 thumb screw ends.

Optional:
Mylar tape for lining the inside of the housing.
Additional diffusion material of your choice.
Velcro or similar for mounting additional diffusion material.
Rubber non-slip tape for lining the camera mount.

The diffuser itself needs to be printed in a transparent material, I used a standard transparent ABS. Two size options available, the larger diffuser attaches to the large housing via 2x M10 screws, the smaller diffuser must be glued to the small