Thingiverse

MacrPro 2019 SSD Bracket

by SteedMaker

7 Downloads

5 Likes

0 Makes

An SSD bracket to hold internal SSD drives for a MacPro 2019.
Print flat on the build plate no need for supports or rafts - ensure the thicken portion is on top. Updated Jan 7 - had to shorten the holes for the SSD - didn't realize it would be different from a 3.5 drive. You will still need to file the holes a bit to get the perfect fit.

The small metal clamp you see in the photos comes off the MacPro frame - look up from the SATA data and power connectors. The 3D printed bracket is designed to sandwich inside the metal clamp.

Please "like" this file if you collect or download it.

You will also need (I ordered these from Aliexpress):

2 of these:
SATA Cable straight 25 cm
https://www.aliexpress.com/item/10000021938520.html?spm=a2g0o.9042311.0.0.4dcb4c4dcvgR2v

mini 10pin to 4 port SATA 15pin HDD Hard Driver Power Supply Cable
https://www.aliexpress.com/item/1005002884525867.html?spm=a2g0o.9042311.0.0.4dcb4c4dcvgR2v

2019 internal ssd macpro MacPro 2019 MacPro2019 mount ssd SSD Bracket ssdmount ssd mount 2019 internal ssd macpro MacPro 2019 MacPro2019 mount ssd SSD Bracket ssdmount ssd mount

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

SteedMaker also publishes on

583 additional models across 1 more platforms

Printables

583 models

♥ 11,277 ↓ 42,986 ⚒ 317

No ratings yet

No comments yet – be the first!

MacrPro 2019 SSD Bracket

Add to Collection