Slicer Discord
Madballs Skull Face – 3D-Druckmodell von MakerOnline MakerOnline
Madballs Skull Face – Bild 1 Madballs Skull Face – Bild 2 Madballs Skull Face – Bild 3 Madballs Skull Face – Bild 4 Madballs Skull Face – Bild 5
Art

Madballs Skull Face

von NoProblem · Art
118 Downloads
28 Likes
0 Makes
Zum Modell
Madballs Skull Face from the mid 1980s. 179x179 to fit for all printers.   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Bambu and Anycubic file included.   The Model is 179x179mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.7mm and the Actual Depth is 2.7mm   Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ IIID Max Red Transmission Distance: 4 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5 This print uses 4 unique filaments   Swap Instructions: Start with Black At layer #8 (0.8mm) swap to Red At layer #16 (1.44mm) swap to Pure Yellow At layer #24 (2.08mm) swap to White for the rest. Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag
Kategorie
Art
Quelle
MakerOnline
Veröffentlicht
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
179 mm (Mittel)
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

NoProblem veröffentlicht auch auf

136 zusätzliche Modelle auf 3 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen