Mag-Mate Locking DW735 Adapters

This is an adaptation of @3d_sauce's adaptation of @needitmakeit's Mag-Mate model. I already had a different 3D printed adapter on my Dewalt 735 planer's dust port that used the OEM lock button. Since I had already taken the OEM 4" adapter off, I wanted to see if I could modify this model so that I could have both a locking and magnetic adapter. I have uploaded the Fusion model so that you can adjust the parameters to allow for the size and quantity of your magnets (I used 6x 8mmx8mm magnets and that seems to work ok). If you adjust the ADAPTER_OD parameter, I would highly recommend test printing the bottom 20mm (the section with the lock button and pin cutouts) to confirm you have the diameter correct for your planer, printer, and filament type. That way you can get the fit correct before committing to the whole print. I printed mine in PETG to have a little better strength and durability compared to PLA. The bottom sections of each adapter flare out slightly so the ADAPTER_OD paramet