Magby #240 Low Poly

Printing suggestion: don't flush the filament in the infill to reduce waste or, if you want to do it, increase the amount of walls to 3 or 4; if not, the eye's black waste will be lightly visible on the sides of the head, as shown in the multicolor model's photos I uploaded. A simple low poly model of the Pokémon Magby. I prepared printing profiles for both Monocolor and Multicolor. It needs support to print properly the arms, the underbelly and the head parts. I used no brim, just some glue to make sure it wouldn't detach itself from the plate during the print. As this was my first modeling attempt, my knowledge are limited and couldn't really succeed with adding the eyes in relief; they are visible only on the multicolor version, where I added them with just an external layer of color. If anyone with more modeling experience want to add them, feel free to remix this model. EDIT: found enough black filament to print a Multicolor copy; will upload photos of the fini