MagFrame 4x6 inch

Also this took me many many tries to get this model right so please consider boosting me👍 This model takes 21 magnets to build I am currently working to reduce the amount used To assemble the frame you must put all the magnets in first First clean the tip of the glue gun This is you you have as controlled amount of the glue as possible Second make sure the polarity from the magnets is correct before you put the magnet into the frame permanently Third Glue into the desired hole for where the magnet will end up Fourth quickly insert the magnet into the hole before the hot glue cools Lastly flip the frame over and apply force so the magnet will fall fully in place You must do these steps for each of the 21 magnets, this should take around 10-15 minuets to complete Now to assemble the frame you need a 4x6 photo <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000002807029/des