Slicer Discord
Magic cat – 3D printable model from MakerWorld MakerWorld
Hueforge & Lithophane

Magic cat

162 Downloads
77 Likes
106 Makes
Go to Model
Cute magic cat*created with filament painting technique using hueforge software. Remember if you want to scale, do it only with x and y axis, z must be the same as original.Boost MeHi, if you appreciate my work, just boost me. If you have private call and want some private hueforge pm me! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA BambuLab Basic BlackPLA BambuLab Matte Marine BluePLA BambuLab Basic YellowPLA Default WhiteSwap Instructions: if you don't have ams just put pause on specified layers and swap filamen manuallyStart with BlackAt layer #7 (0.64mm) swap to Marine BlueAt layer #11 (0.96mm) swap to YellowAt layer #17 (1.44mm) swap to White for the rest.
Category
Hueforge & Lithophane
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
2 colors
Single piece 2 colors / AMS
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Colors
2 (AMS/MMU recommended)
Post-processing
Painting
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection