Magic The Gathering Commander Deckbox With Toploader Slot (Fits single and double sleeved)

Deck Box for Magic The Gathering Commander Deck, with a commander in top-loader. Designed to be printed in three pieces: the box, and two pieces for the lid. The pieces of the lid should be glued together using any kind of plastic safe adhesive. To do this best I've found you should first lightly sand down the surfaces of the pegs on the bottom lid part, and then apply glue to the four peg holes as well as the thin channels on the top piece of the lid. Apply pressure with weight (I use filament boxes) for a period of time to ensure a snug fit. Once assembled, the top-loader holding your commander should be able to slide right in, giving you a view of your commander once in the box, so you don't lose track of which box is for what deck.You'll need 10 3x8 mm magnets (I'll add a link at the bottom for the ones I buy off amazon). 5 go in the lid, and 5 go in the box for the holes of that size. Place them accordingly so that the lid will stay in place when in the slot. Some glue may be requ