Magic the Gathering Logo

Magic the Gathering logoThis model is free - thank the Planeswalkers Prints in parts on 3 plates. One for the background, one for the letters, and one for the emblem. This separates the colours for those without an AMS. Tight tolerances which allows the pieces to click in and hold for a semi-permanent option. This is very satisfying when assembling. Be careful to align the smaller letters correctly before pushing in as they can be tight if not pushed in evenly. Make sure they are also facing the correct way. You may need a small craft mallet or push against a hard surface such as a table to seat the letters completely. All letters are printed backwards and need to be flipped before insertion. Use glue to hold the pieces together for a permanent solution. Modelled from scratch to allow the pieces to overlap by a minimum 3mm.There are 3 different design profiles available:The standard - which is the same scale and thickness as all my other designs. Roughly 30mm font height and specifical