Slicer Discord
Magic Trackpad+Touch ID using 100% layout Keyboard – 3D-printbaar model van MakerWorld MakerWorld
Electronics

Magic Trackpad+Touch ID using 100% layout Keyboard

16 Downloads
14 Likes
6 Makes
Model downloaden
I didn't find a model combining the 100% layout Magic Keyboard with Touch ID and the Magic Trackpad so I decided to do it myself. I've also converted them from lightning to USB-C - for this I've ordered 2 lightning flat ribbon cables from AliExpress they are power only. The USB C connector that I used is also from AliExpress. The 2 cables are soldered in parallel.All of the screws used for the PCB/Port/Touch ID are from the Magic Keyboard.For the PCB I've used the 4 grey screws;For the lightning port I've used 2 black screws with a small headFor screwing the lightning port shell into the case I've used 2 black screws with a big headFor the Touch ID I've used the same screw and mechanism as in the original keyboard, 4 silver screws and 2 black screws with a big head. I've also transfered the small round metal piece used for the clicking mechanism of the Touch IDYou may not have to fully screw the 4 silver screws that hold the Touch ID module, the toleranc
Categorie
Electronics
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Eendelig Hardware nodig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Polycarbonate
Nabewerking
Hardware
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie