Magic Trackpad V2 Case

I designed this for a video on my YouTube channel [Modern Hobbyist](https://www.youtube.com/c/modern_hobbyist) as a demonstration for how to embed magnets and nuts directly into your 3d prints. In this specific instance, I used 5x2mm Neodymium magnets in this design and with 12 of them, is should be enough to hold the top of the case on in most instances.

To pause the print at the appropriate height, I used the PrusaSlicer Filament Color Change feature to add an M600 at the correct layer. M600 only works if you have a printer running Marlin, so make sure that is the case. Otherwise, you'll have to follow different instructions to pause your print.

To resume printing after inserting the magnets, either use the touchscreen on your printer to continue, or send the M108 command via a terminal connection.

**This was also designed with 0.2mm layer height in mind, so make sure to do a layer height that is a divisor of 0.2mm.**

This design was mostly made for fun to demonstrate