Magic Vanish Box

Overview:Enjoy this magical box that makes objects inside disappear! No supports!Mechanism not visible for spectator (no hole like in many other similar models, box can be shown from all sides!)No additional parts required!Easy assembly (step by step down below)Easy to use (instructions down below)I used PLA Basic Black from BambuLab for my print. Please fully read the instructions to avoid misuse.Assembly:Insert the knob in the front hole. It's a press fit and shouldn't need any glue, but if you want to be extra safe you can use a little.Slide the smaller box all the way into the larger box. (I recommend sliding it in and out again multiple times to make it move in a smooth way because the friction could be a bit higher in the beginning. Keep in mind that some friction is needed for the mechanism to work.) Press the back cover onto the large outer shell until it snaps in place. Be careful to use the orientation shown in the picture down below! For that, look at the groove of t