Slicer Discord
Magicraft game (HueForge) – 3D printable model from MakerWorld MakerWorld
Hueforge & Lithophane

Magicraft game (HueForge)

0 Downloads
7 Likes
0 Makes
Go to Model
I made this HueForge art of Magicraft game Sife of this model is 230 × 174,5 mm Instruction for HueForge print: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 174.5x230mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.9mm and the Actual Depth is 2.1mm Filaments Used: PLA Aurapol Black Transmission Distance: 0.2 PLA BambuLab Basic Red Transmission Distance: 4 PLA Nebula Silver Transmission Distance: 5.4 PLA Aurapol Baby Blue Transmission Distance: 1.8 PLA Aurapol Sandy Blush Transmission Distance: 2.2 PLA BambuLab Basic Jade White Transmission Distance: 4.6 PLA Aurapol Summer Sky Transmission Distance: 1.4 This print uses 7 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #9 (0.8mm) swap to Silver At layer #15 (1.28mm) swap to Baby Blue At layer #16 (1.36mm) swap to Sandy Blush At layer #17 (1.44mm) swap to Jade White At layer #23 (1.92mm) swap to Su
Category
Hueforge & Lithophane
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
50 mm (Small)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection