Magnet access installation pen 磁铁存取安装笔

这款磁铁笔是 3D 打印爱好者的 “磁铁安装神器”。它通过刻度槽 + 指示针的设计，能精准显示磁铁剩余量，让你对耗材把控一目了然；专业的磁铁分配结构，可简化磁铁在 3D 打印件中的插入流程 —— 不仅能加快安装速度，还能确保磁铁方向正确、安装牢固。无论是 5mm 还是 6mm 规格的磁铁，都能在它的辅助下精准就位，特别适合那些对磁铁放置的 3D 打印项目，让 “磁铁嵌入” 从繁琐操作变成高效且精准的流程。  This magnetic pen is a "magnet installation artifact" for 3D printing enthusiasts. It is designed with a scale slot and indicator needle to accurately display the remaining amount of magnets, allowing you to control consumables at a glance; A professional magnet distribution structure can simplify the insertion process of magnets in 3D printed parts - not only can it accelerate installation speed, but it can also ensure the correct direction and firm installation of magnets. Both 5mm and 6mm magnets can be accurately positioned with its assistance, making it particularly suitable for 3D printing projects that require magnet placement, transforming "magnet embedding" from a tedious operation to an efficient and precise process. 安装注意：  Installation precautions: 在尾部旋钮插入主体后，需要注意六角孔洞有无穿透，如穿透可以继续后续限位安装。 After inserting the tail knob into the main body, pay attention to whether the hexagonal hole penetrates. If it penetrates, continue with the subsequent limit installation. 限位穿销可用耗材丝，在穿过之后用小刀或钳子切断多余料丝。 Limit threading can use consumable threads, and after threading, use a knife or pliers to cut off excess threads. 安装的第一颗磁铁需要用胶水固定。 The first magnet installed needs to be fixed with glue. 滑杆安装时候需要注意孔洞对准刻度槽方向安装。 When installing the sliding rod, it is necessary to pay attention to aligning the holes with the direction of the scale groove during installation. 等到滑竿旋钮到和顶头平齐时候就可以安装上刻度指示卡扣了，此刻度为0. When the sliding rod knob is level with the top, the scale indicator buckle can be installed. At this moment, the degree is 0