Slicer Discord
Magnet Cable Path Guides – 3D printable model from MakerWorld MakerWorld
Electronics

Magnet Cable Path Guides

2 Downloads
2 Likes
0 Makes
Go to Model
Optimized for low-voltage installations, these guides come in two primary sizes and clip gaps. Size Options: Small: 13mm internal diameter capacity. Large: 21.8mm internal diameter capacity. Clip Gap Variations: Tight Fit: 3.4mm opening. Loose Fit: 5.0mm opening. Requires 15x3mm magnets listed in the BOM if you get them through Bambu Lab. They are also available on Amazon: https://www.amazon.com/dp/B0CCXT3M7Z?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 I made these with a specific project in mind but will make variations and improve functionality as the need arises over time. They are not intended to make a strong connection in high traffic areas and do not replace hard points, but rather a path guide between hard points in a zero traffic area.
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection