Magnet Fidget Spinner

Magnet Fidget Spinner  It uses 10mm rare earth magnets. Spins for 30-45 seconds without too much effort. It accelerates fast since the magnets have more travel. Similar to the way it speeds up as it slows down, it also slows down as it speeds up so it needs one or two more flicks to speed it up after the magnets move to the outer position. Post-Printing -Uses 10mm diameter rare earth magnets, which come in a variety of thicknesses - The thinner magnets allow for more configuration options, using more magnets should result in transitioning at higher speeds. -Superlube oil or similar - I usually disassemble it after printing and a few minutes of break-in, then add one drop of superlube into each of the pivot points.