Magnet Holder with Keyring

This is a Magnet Holder with a Keyring! This model works with 18mm x 3mm magnets(it utilizes 3 of the magnets aligned vertically). The hole made for the magnets is tapered, so it should fit your magnets very nicely(might need a mallet to really get it in if your printer's tolerances are not amazing).

This print takes little under an hour to print and will consume 9.15g of filament with the included, unmodified, .3mf files exported from Bambu Studios.

Filaments used: Bambu Basic PLA(Turquoise (10605)).

Main Settings:

1) No brim
2) Basic tree supports used for the centre core where the magnets are inserted.
3) 15% Gyroid infill.
4) 2 perimeters(walls).
5) .2mm Layer Height.

Feel free to support me financially by following this link: https://buymeacoffee.com/devilish3dprints - your support truly is appreciated :)
Once there, you can also buy a license to sell the stuff that I make! (License is limited to the selling of the physical, 3d-printed model; i.e, digital files cannot be sold