Magnet Placer (Parametric)

I needed a way to consistently place magnets with the correct orientation, so I modeled these to place magnets.Non-printed Parts required:2 6mm x 2.7mm magnets2 30mm x 4mm springs2 M3 x 40mm boltsSpring kit that I used: https://www.amazon.com/dp/B08KD5Q2P7?ref=ppx_yo2ov_dt_b_product_details&th=1Magnets that I used: The magnets that I used are no longer available on amazon, but I'm sure some 6mm x 3mm magnets would work just as well. (you could also adjust the magnet height parameter of the model to accomplish this).Using the parameters of the fusion 360 file, you can adjust the part to meet your needs. The model is fully parameterized with ONE exception. The threads are not able to be parametric in this model, so you will need to edit the thread features at the bottom IF you edit the radius of the tube. The threads will need to be changed to a thread close to your new outer diameter (tube inner radius x 2 + 0.4 cm). The model currently has 14 mm threads for the 0.5 cm radius (giving a