Magnet Socket Clips for Ernst Socket System

The modeled dimensions are:1/4" - 0.245" studmagnet holes modeled: 3.25mm diameter, thru holemagnets actual: 2.98mm diameter, 3.02mm long3/8" - 0.370" studmagnet holes modeled: 6.2mm diameter, 3mm depthmagnets actual: 5.98mm diameter, 2.75mm long1/2" - 0.495" studmagnet holes modeled: 6.2mm diameter, 3mm depthmagnets actual: 5.98mm diameter, 2.75mm longPrint settings make a big difference in fit with these. They may require a little trial and error in terms of slicer settings, but they use very little filament … I sized the magnet holes for press fit without using any glue. If you have different size magnets, let me know. If yours are just slightly different and end up loose, a drop or two of glue usually works very well. Shown are the ones I printed in PLA with a 0.6mm nozzle, 0.24mm layers. I recommend PETG or ABS/ASA over PLA.