Magnetic Atomic Unit Cells for Material Science

I plan to configure the support settings later to make removal easier. Also I may make some modifications to remove the need for supports on unit cells like FCC - which have difficult to access support material. I also plan to make a more accurate model of the HCP unit cell, a more accurate model will require structural supports or assembly. Includes models for Body Centered Cubic, Simple Cubic Cell, Face Centered Cubic, Hexagonal Close Packed ( two versions ). If it isn't obvious to you, I would recommend using supports, as this model would not print well without them. Also, I would recommend increasing the number of wall loops / perimeters (at least 4) to ensure the atom segments do not easily break. There are hidden structural beams connecting each corner atom / central atom; a thicker wall will help with rigidity. Print Settings: Infill %15-20Infill TypeGyroid (optional)Wall Loops / Perimeters4 Materials Needed: 10mm diameter magnet , ( ~ 1.5 ~ 2 mm) thick - [BCC, SBC, FCC] (24 mag