Magnetic Bit Holder for Gridfinity

Magnetic bit holder for Gridfinity (2x2 grid footprint). Made to hold 49 ¼" hex bits and has a magnetic slot for a bit holder as well. The .3mf print file has a pause included at layer 46 to insert the magnets and a custom command to reduce the speed to 50% for layers 47-50 to ensure a clean print and adhesion over the magnets. If you are printing from then .step file, you will need to add the pause in your slicer.I used the following magnets from Amazon for the project (https://www.amazon.com/dp/B0DMVDNY5T?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1). Note that although they are listed as 60x10x3, the actual dimensions are quite a bit smaller. The model is designed to accommodate the actual magnet size (with some space left for tolerance) and not the advertised 60x10x3. I use a couple drops of this glue (https://www.amazon.com/dp/B0CX3KCPFD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) to hold the magnets in place.