Magnetic CNC Offline Controller Holder

This is a magnetic holder for a CNC offline controller, designed to be mounted directly onto the CNC frame. The system consists of two parts:

- A magnetic plate to be glued to the back of the controller
- A magnetic holder bracket fixed to the CNC structure

If you’re interested in a version without magnets, check out this link: [CNC Offline Controller Holder](https://www.thingiverse.com/thing:7302325)

If you’re interested in other CNC mods, check out my profile.

#####Magnets

Nominal size: 4 mm diameter × 3 mm height
Actual measured height: 2.6 mm

Quantity required: 8 magnets total
- 4 magnets for the plate
- 4 magnets for the holder

If the magnet pockets turn out to be slightly loose depending on your printer calibration, you may need to secure the magnets with glue.
Make sure to respect magnet polarity before inserting them.

####Mounting Hardware

The holder is designed to be fixed using M3 × 10 mm pan head screws and T-nuts.
If you do not have standard T-nuts, you can use r