Slicer Discord
Magnetic Easter Picture Frame - Customizable – 3D-Druckmodell von MakerWorld MakerWorld
Decor

Magnetic Easter Picture Frame - Customizable

9 Downloads
13 Likes
2 Makes
Zum Modell
This picture frame is the perfect way to add a personal touch to your Easter basket. Easy to print and put together and the text is fully customizable. You can easily scale it up or down depending upon the size of your photo. Just remember to scale BOTH the frame and the base the exact same so they'll fit together after printing AND only scale the base and the frame objects otherwise the holes on the back will scale as well.If you customize the text make sure that you do not move the text up too far OR increase the size of the text too much otherwise the frame will not be able to snap in properly. You can also make the text flush with the base to avoid this from happening if you want the text to be larger.The frame clicks into the base and if your printer is well tuned you shouldn't need any adhesive to hold it in place. I did add holes via the slicer for magnets. I used 8X2mm magnets as that's what I had on hand but you can easily adjust the size in the slicer depending up
Kategorie
Decor
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen