Magnetic Installation Aid

该工具只需不到4克的材料，可以帮助您在安装磁铁时迅速便捷的完成。经常在安装磁铁时弄反磁铁极性，尤其在使用胶水黏住磁铁的时候，所以我设计这款磁铁安装辅助工具，用不同颜色的打印2个小工具。然后黏上直接 5mm厚度3mm磁铁，注意2个磁铁极性要不一样并分别黏在小工具上。然后在其他模型上需要粘磁铁的时候，将不同磁性的磁铁先粘在这个小工具上。然后卡到需要安装的模型上。为防止磁铁安装到位后被工具上的磁铁再次吸出来，可以利用小工具突出的圆形特征通过平移的方式将2个磁铁安全分离。The tool requires less than 4 grams of material and helps you install magnets quickly and easily.I often reverse the polarity of the magnet when installing magnets, especially when using glue to stick the magnet, so I designed this magnet installation aid and used two small tools of different colors to print. Then stick a direct magnet with a thickness of 5mm and a thickness of 3mm, noting that the two magnets should have different polarities and stick them on the small tool respectively.Then, when magnets need to be adhered to other models, magnets with different magnetic properties are adhered to this gadget first. Then stick it to the model you need to install.In order to prevent the magnets from being sucked out again by the magnets on the tool after b