Magnetic loop gear reduction drive

This is a 3.8 to 1 reduction drive for making magnetic loops easier to tune. It's best to print the clutch and input gear at 40% infill and 3 perimeters for strength. The output is set for capacitor shafts of 6.4 mm diameter. If you have a different shaft diameter, let me know and I'll produce additional models to accomodate.
You will need 6 M4x20 and 1 M4x8 button head screws. Also a M3x8 with a nut.
There is a assembly instructional video linked here.
Please watch it before attempting assembly.
https://youtu.be/AjSzK6fjMsU