Thingiverse
Magnetic Micro Drone Gate
door Goldenmechy
6
Downloads
7
Likes
0
Makes
I took a great concept from a fellow maker and changed it just enough to make it not only functional but easy to assemble.
I removed the tabs from each part and replaced them with spots for small magnets.
NOTE: This means when you install the magnets you need to double check the poles before gluing in place.
Each part is designed so that each magnet can be press fit in place but I put a dab of superglue in first just to make sure there is no change of them popping out.
Original design:
https://www.thingiverse.com/thing:1730984
Assembly:
6mm x 3mm Magnets:
https://www.amazon.com/gp/product/B077K364Z7?ie=UTF8
To make a full gate you will need to print 6 Arms, 4 Elbows, and 2 Mounts (2 styles for different mounting capabilities)
Inside each end of the arms you want to make sure the same pole of the magnets are facing outward. This means both ends of the arm should repel both ends of any other arm.
The Elbow and Mount magnets are then installed opposite o
I removed the tabs from each part and replaced them with spots for small magnets.
NOTE: This means when you install the magnets you need to double check the poles before gluing in place.
Each part is designed so that each magnet can be press fit in place but I put a dab of superglue in first just to make sure there is no change of them popping out.
Original design:
https://www.thingiverse.com/thing:1730984
Assembly:
6mm x 3mm Magnets:
https://www.amazon.com/gp/product/B077K364Z7?ie=UTF8
To make a full gate you will need to print 6 Arms, 4 Elbows, and 2 Mounts (2 styles for different mounting capabilities)
Inside each end of the arms you want to make sure the same pole of the magnets are facing outward. This means both ends of the arm should repel both ends of any other arm.
The Elbow and Mount magnets are then installed opposite o
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!