Magnetic phone mount

This is an original magnetic phone stand, mostly the first revision. This is designed to hold a phone via magnets and a plate on the phone and charge a Samsung Galaxy Watch 4 (may fit other GW depending on charger size).

There are 3 parts: the stand, round magnet holder, and the joint/hinge to connect the 2. I've designed it so that the angle the phone is at is adjustable. The print will need a M2x13mm and nut (can be longer than 13MM, but at least this long) and an optional M2x10mm. The 13mm is used with a nut to adjust the phone angle. The 10mm is used to anchor the hinge to the stand and is optional. The hinge piece is a snug fix and may require sanding to fit.

The magnet holder is made to take 5mmx2mm round neodymium magnets. It can fit 3 per hole and this is more than adequate to hold a Galaxy s21. Depending on your printer, you may have to heat the hole or magnets to get them in. 1 printer they fit in snugly without assistance, the second printer I needed to heat