K2+ Magnetic Slide + bin for left side

Deflector and slide magnetically attached to the back of the printer- Left side versionThe bin is also held in position by a magnet.All parts are designed to be printed without supports.Only the slide attachments to the deflector require support.The deflector and slide must be paused at height 158 ​​to insert the magnets.For part 3 of the bin, a pause must be made at height 22.The magnet measures Ø10 x 3mm and must be glued with a dab of cyanoacrylate glue (the magnetic components of the print head attract it), you'll need 5 pieces.The colored parts are printed on 0.05mm layers. If you wish to print without color, this is possible; simply ignore the coloring of the affected areas, and the slicer will ignore them.Parts 1, 2, and 3 of the bin assemble to form a single unit.The bin is designed in the style of Creality printers and is equipped with a ramp that pushes the waste forward.All parts were designed on Creo Parametrics and printed before going online.