Thingiverse
Magnetic Socket Holders
door imcat
6
Downloads
7
Likes
0
Makes
Magnetic holders for sockets designed to be used with 1/2-inch and 3/4-inch mild steel flat bar stock cut to length.
The design spec required customizable piece count, most hold sockets when magnetically coupled to a surface in any orientation, could survive a drop from 6 feet with sockets on the rail, and must be able to add sizes anywhere on the rail.
Definitely overkill for most, but looks great and is very functional.
Materials:
Bar stock, 1/2"x1/8"x36 for 1/4" drive
Bar stock, 3/4"x1/8"x36 for 3/8 and 1/2" drive (https://www.homedepot.com/p/3-4-in-x-36-in-Plain-Steel-Flat-Bar-with-1-8-in-Thick-801767/204225765)
Magnets, disk, 10x10x5mm N35 or better (3/8 and 1/2" magnetic base)
Magnets, disk, 8x8x5mm N42 or better (1/4" drive magnetic base)
Magnets, square, 5x5x5mm N42 or better (socket retainer)
The design spec required customizable piece count, most hold sockets when magnetically coupled to a surface in any orientation, could survive a drop from 6 feet with sockets on the rail, and must be able to add sizes anywhere on the rail.
Definitely overkill for most, but looks great and is very functional.
Materials:
Bar stock, 1/2"x1/8"x36 for 1/4" drive
Bar stock, 3/4"x1/8"x36 for 3/8 and 1/2" drive (https://www.homedepot.com/p/3-4-in-x-36-in-Plain-Steel-Flat-Bar-with-1-8-in-Thick-801767/204225765)
Magnets, disk, 10x10x5mm N35 or better (3/8 and 1/2" magnetic base)
Magnets, disk, 8x8x5mm N42 or better (1/4" drive magnetic base)
Magnets, square, 5x5x5mm N42 or better (socket retainer)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
