Thingiverse
Magnetic Switch
door povsky
159
Downloads
148
Likes
0
Makes
This is a magnetic switch that uses cheap whiteboard magnets and standard #10 hex nuts to work. Demonstration: https://youtu.be/YaQXLcFUSg4
I originally saw https://www.youtube.com/watch?v=n9tZIFfM14o from Andrew Klein and wanted to make my own. I saw other users such as https://www.thingiverse.com/thing:3556210 had the idea to use standard nuts so it can be assembled at home easily.
This design takes it a few steps further by using space more efficiently to allow more magnets and therefore larger magnetic fields, an internal locking feature, and a snap-fit assembly made entirely of 3D printed parts.
I recommend using a bench vice to install the press-fit part, make sure it is fully seated.
Required Materials:
12x #10 Hex Nuts https://www.amazon.com/Hillman-140021-Hex-Machine-Screw/dp/B000BQ8DE8/ref=as_li_ss_tl?dchild=1&keywords=#10-24+Machine+Hex+Nut&qid=1589223393&sr=8-6&linkCode=sl1&tag=povsky-20&linkId=ed135f5e240656b1d75f47b8780f6c61&language=en_US
24x 10x5x3mm Mag
I originally saw https://www.youtube.com/watch?v=n9tZIFfM14o from Andrew Klein and wanted to make my own. I saw other users such as https://www.thingiverse.com/thing:3556210 had the idea to use standard nuts so it can be assembled at home easily.
This design takes it a few steps further by using space more efficiently to allow more magnets and therefore larger magnetic fields, an internal locking feature, and a snap-fit assembly made entirely of 3D printed parts.
I recommend using a bench vice to install the press-fit part, make sure it is fully seated.
Required Materials:
12x #10 Hex Nuts https://www.amazon.com/Hillman-140021-Hex-Machine-Screw/dp/B000BQ8DE8/ref=as_li_ss_tl?dchild=1&keywords=#10-24+Machine+Hex+Nut&qid=1589223393&sr=8-6&linkCode=sl1&tag=povsky-20&linkId=ed135f5e240656b1d75f47b8780f6c61&language=en_US
24x 10x5x3mm Mag
povsky publiceert ook op
20 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
