Mahito Hueforge

Simple hueforge of Mahito from the anime JJK. More to come hope yall enjoy (MADE ON THE A1) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmThe Model is 245x122.5mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4734aa PLA PolyLite Temp Purple-Pink-Translucent (Cold) Transmission Distance: 4 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.72mm) swap to Temp Purple-Pink-Translucent (Cold) (what it is named in hueforge I just used a normal purple I had) At layer #12 (1.2mm) swap to Cyan At layer #18 (1.68mm) swap to White for the rest.