Creality Maker-45cm (Canada)

Design ConceptThis CREALITY - themed 3D - printed figurine is designed with inspiration from Canadian culture, specifically hockey, a beloved sport in Canada. The triangular - shaped robotic figure incorporates the CREALITY brand identity, holding a hockey stick, which instantly conveys a sense of sporty enthusiasm. It's a perfect decorative piece for fans of 3D printing and hockey, merging brand recognition with a popular cultural element.Print SettingsPrinted using a K2 Plus printer. Set the layer height to 0.2mm to achieve a good balance between detail, like the texture of the robotic parts and the hockey stick, and printing efficiency. With 2 walls, the figurine has sufficient structural integrity to withstand handling. A 15% infill is used to keep the model lightweight yet sturdy. PLA material is recommended for its ease of printing and ability to display vibrant colors, such as the red and gray seen on the figurine. Supports are needed for overhanging parts, like the hands gripping the hockey stick and parts of the robotic limbs; use 10% density supports at a 60 - degree angle for easy removal. The total print time for all parts, including the body, arms, legs, hockey stick, and base, is approximately 8 - 10 hours, varying based on part complexity.AssemblyThe figurine comes in several parts. First, attach the arms to the body using a small amount of adhesive suitable for PLA. Make sure the arms are positioned correctly to hold the hockey stick naturally. Then, connect the legs to the body, ensuring stability. Next, place the hockey stick in the hands of the figurine, securing it if necessary. Finally, attach the assembled figurine to the base with the “CREALITY” text, aligning it properly to complete the look.