Mandala - HueForge

First go at using HueForge. Created a Mandala that can be printed in 4 colours! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x99.15mm in size You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Blue At layer #8 (0.72mm) swap to Yellow At layer #13 (1.12mm) swap to Orange At layer #20 (1.68mm) swap to Jade White for the rest.