Mandalorian Hue Forge

I used Midjourney to create this Mandalorian image. Its a 200 x 200 image of Mando posing with his gun. I have saved the 3MF with the speeds and settings i used and the one that is displayed in the images. PLEASE FOLLOW THESE PRINT INSTRUCTIONS TO GET THE SAME RESULTS AS IN IMAGES: (YOU CAN USE A DIFFERENT BRAND FILAMENT IF YOU DONT HAVE POLY TERRA BUT THE RESULTS WILL BE DIFFERENT: Print at 100% infill with a layer height of 0.16mm with a base layer of 0.16mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.4mmFilaments Used: PLA PolyTerra Black Transmission Distance: 0.3 PLA PolyTerra Forest Green Transmission Distance: 0.5 PLA BambuLab Basic Orange Transmission Distance: 7 PLA PolyTerra Cotton White Transmission Distance: 2.5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.96mm) swap to Forest Green At layer #7 (1.12mm) swap to Orange At layer #12 (1.9