Mandelorian Helmet

Please rate my prints, this really helps me, thank you Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.5x225mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Kexcelled Green Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA Kexcelled Sky Blue Transmission Distance: 2.6 PLA BambuLab Basic Jade White Transmission Distance: 4.7This print uses 5 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Green At layer #13 (1.12mm) swap to Red At layer #17 (1.44mm) swap to Sky Blue At layer #25 (2.08mm) swap to Jade White for the rest. Boost MeI hope you like the print if you do please consider a boost. It's for free and it would help me a lot. Thank you and enjoy the print