manga face

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200.01x133.87mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.6mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Silver Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5 PLA+ Sunlu Red Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Silver At layer #12 (1.04mm) swap to White At layer #19 (1.6mm) swap to Red for the rest