Slicer Discord
Manticore - Hueforge – 3D-printbaar model van MakerWorld MakerWorld
Hueforge & Lithophane

Manticore - Hueforge

6 Downloads
10 Likes
2 Makes
Model downloaden
This is 7 colour Hueforge of Manticore. I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini.And two profiles with pause during 4th colour for changing the other three spools.Guide for printing more than 4 colours with single AMS down below instructions.Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Boost MeI print all of my creations myself.If you like my work, pls send me a boost, it will help me make more.Thank you. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 3mm and the Actual Depth is 3.1mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA DevilDesign Gray Transmission Distance: 1.7 PLA BambuLab Basic Red Tra
Categorie
Hueforge & Lithophane
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Gevorderd Gemiddelde betrouwbaarheid
Waarom?
7 kleuren · grote print
Eendelig 7 kleuren / AMS
Supports 1/3
Montage 0/3
Instellingen 3/3
Bedgrootte 2/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Min. bedgrootte
200 mm (Groot)
Kleuren
7 (AMS/MMU aanbevolen)
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie