Thingiverse
Tools
Vai al Modello
Manual Turntable
208
Download
190
Likes
2
Makes
This is a free rolling turn table measuring approx 16.5 cm / 6.5 in
you need support for the base but only for the pins for the bearings.
It uses 3x 608 bearing (skateboard wheel bearing)
you can try printing some bearings if your printer is good enough
(heres some links to some printable bearings)
https://www.thingiverse.com/thing:2482146 (easiest to print with different tolerance sizes)
https://www.thingiverse.com/thing:3002837
https://www.thingiverse.com/thing:2348829
Edit: ive since added struts to stop the base from beeing so squishy.
Edit: have removed the outer ring from the lid as its not needed
you need support for the base but only for the pins for the bearings.
It uses 3x 608 bearing (skateboard wheel bearing)
you can try printing some bearings if your printer is good enough
(heres some links to some printable bearings)
https://www.thingiverse.com/thing:2482146 (easiest to print with different tolerance sizes)
https://www.thingiverse.com/thing:3002837
https://www.thingiverse.com/thing:2348829
Edit: ive since added struts to stop the base from beeing so squishy.
Edit: have removed the outer ring from the lid as its not needed
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
