mardave meteor wheels

Edit 16/11/24 : 56mm / 2.2 " wheels added
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

wheels for ether a mk1 or mk2 mardave meteor.

They are standard fit with no adaptors required and take 2" tyres

Front wheels take 4x8x3 MR84ZZ bearings.

I'm still working on these to make a bit easier to print. The rear dish is at about 55 degrees so can be done without support on the inside ( set support angle to 60 degrees) but the wheel needs to be printed outer face down. Still needs tree support for the rim bead parts.

the back of the front wheel dish is flat to aid support removal, so print front face up with tree support.

I found tree supports work best to hold the wheel tyre beads.