Marilyn Monroe Hueforge

Kind feedback accepted. I'll do my best to learn and grow, and hopefully have more to contribute in the future. Thanks for checking out my project! I've scaled this as large as I could, without interfering with the prime tower and flow calibration lines. Many Hueforge prints I've found on Makerworld seem to be incredibly thin and flimsy. This is not the case with my prints. All of my Hueforge prints are 2.5-3.5mm thick, so they are sturdy enough to stand in a display, and won't bend or crease. This one in particular is 3.2mm thick. If this is your first Hueforge print, be aware that the image will appear black in Bambu Slicer. After you slice it, you will see the color, but it will then look odd and pixel-y because the slicer can't compensate for the blending of colors. Can be printed with or without AMS. Without AMS, you can do manual color swaps, as each layer is a single color. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 202.28x235.01m