Marilyn Monroe - Hueforge

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.12mm Also, use a brim to prevent lifting in corners. The Model is 200x200mm in size Filaments Used: PLA Hatchbox Black Transmission Distance: 0.2 PLA Hatchbox Red Transmission Distance: 4.1 PLA Hatchbox White Transmission Distance: 3.7 PLA Hatchbox Yellow Transmission Distance: 6.6 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #4 (0.48mm) swap to Red At layer #7 (0.84mm) swap to White At layer #8 (0.96mm) swap to Red At layer #11 (1.32mm) swap to White At layer #13 (1.56mm) swap to Yellow for the rest. Tip: You can substitute red color for another color and create different background hues