Mario hueforge

Remember if you sant to scale, do it only with x and y axis, z must be the same as original. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Tough Gray Transmission Distance: 1.8 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray At layer #19 (1.6mm) swap to Ash Gray At layer #21 (1.76mm) swap to Jade White for the rest.