Mario Jumping Switch (Push-Lock Switch)

這個模型是用之前有一個像素馬力歐的模型, 做完像素馬力歐, 我就想說除了擺飾能不能有特別的功能剛好買了一個按鍵的PC延長開關, 想說可以利用自己設計的自鎖開關來觸發. 除了開關用途還可以做完桌上馬力歐的擺件 如果你想要製作的話, 需要另外有以下的材料0.5*7*70 mm規格的彈簧按鍵型的開關縮小約0.5倍的像素馬力歐This model is based on a other pixel Mario model. After completing the pixel Mario, I thought about whether it could have a special function beyond just being a decorative piece.I happened to buy a PC extension switch with a button, so I considered using a custom-designed self-locking switch to trigger it. In addition to its function as a switch, it can also serve as a desktop Mario figurine.If you'd like to make one, you'll need the following additional materials:A spring with specifications of 0.5×7×70 mmA button-type switchpixel Mario which is smaller in 0.5 ratio. 這張圖是我的開關電腦的按鍵開關:This pic is my button for switching of PC: 組裝流程:Assemble process:把spring-base安裝到 push-lock-back-lid上, 怕不穩定可以上膠水( settle the spring-base to the push-lock-back-lid as showed in the pic) 2. 把push-lock-main-back和push-lock-main-front組裝起來, 在角落有小方塊