MakerWorld
Hueforge & Lithophane
Zum Modell
mario slate hueforge
20
Downloads
22
Likes
13
Makes
mario slate hueforge Project: mario slate hueforge.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x162.88mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.88mm and the Actual Thickness is 1.92mm Filaments Used: #000000 PLA Kingroon Black Transmission Distance: 0.4 #658697 PLA Overture Gray Blue Transmission Distance: 6.5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 6.8 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Gray Blue At layer #15 (1.28mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
