Cults3D
Game
Go to Model
Mark V Walker
0
Downloads
2
Likes
0
Makes
The set includes a model of the D.R.A.G.O.N. walking tank. It will fit perfectly into your Weird World War 1 themed scenery. It was designed to be used in the Dragon Hunt scenario for Trench Crusade. The tank was inspired by the design of the British Mark V tank.
The set is divided into elements friendly to resin printing and separately for filament printing.
The model does not have supports for resin printing.
FDM print tip! In the sideleft and sideright elements, local supports are required at the lower side armor plates.
If you want to mount all 6 legs on both sides, print the Middle legs twice.
The railings should also be printed twice for each side.
For the top, you have the following options: a hatch, a tower with a movable barrel, or a static top, both with space for one or two barrels.
The model was designed to be mounted in the included 122x160mm base.
Dimmensions: 20x14x10cm
The set is divided into elements friendly to resin printing and separately for filament printing.
The model does not have supports for resin printing.
FDM print tip! In the sideleft and sideright elements, local supports are required at the lower side armor plates.
If you want to mount all 6 legs on both sides, print the Middle legs twice.
The railings should also be printed twice for each side.
For the top, you have the following options: a hatch, a tower with a movable barrel, or a static top, both with space for one or two barrels.
The model was designed to be mounted in the included 122x160mm base.
Dimmensions: 20x14x10cm
HexBrick also publishes on
123 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
