Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / People / Marshall Figurine / Common Side Effects
Marshall Figurine / Common Side Effects – 3D printable model from MakerWorld MakerWorld
People

Marshall Figurine / Common Side Effects

by FlmanCreates · People
4 Downloads
10 Likes
1 Makes
Go to Model
Marshall inspired figurine from the Adult Swim show “Common Side Effects” 🍄😎Boost MeFeel free to drop a boost if you are a fan of the show and enjoy this model :) Please share any photos of your printed Marshalls :)Printed with a 0.2mm nozzle at 0.10mm layer height at 6hr 7 min, opt for higher detail= more time :)Generated normal supports work best, avoid tree supports as I have tried 3 times before with different types at 0.06mm layer height, some parts are delicate and normal provided the best quality/while actually finishing.New to painting FDM prints so have the bare minimum atm, feel free to share any tips for painting your prints!
Category
People
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Medium confidence
Why?
supports needed · 0.10mm layers
Single piece Supports required
Supports 2/3
Assembly 0/3
Settings 2/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Layer height
0.1 mm
Est. print time
6 h
Post-processing
Painting
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

FlmanCreates also publishes on

14 additional models across 1 more platforms

MakerOnline
14 models
♥ 281 ↓ 871
Verified by matching model titles across platforms.
Frequently Asked Questions
Does Marshall Figurine / Common Side Effects need supports when printing?
Yes, Marshall Figurine / Common Side Effects will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
How long does it take to print Marshall Figurine / Common Side Effects?
According to the design notes, Marshall Figurine / Common Side Effects takes approximately 6 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Marshall Figurine / Common Side Effects available in?
Marshall Figurine / Common Side Effects is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Marshall Figurine / Common Side Effects free to download?
Yes, Marshall Figurine / Common Side Effects is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Dummy13 X StormTrooper
Dummy13 X StormTrooper
by TroisCentTrenteTrois
↓ 27.7k ♥ 11.8k
the rocktopus
the rocktopus
by Ariking9802
↓ 13.8k ♥ 1.2k
Anatomically Correct Human Skull (Homo Sapiens Sapiens)
Anatomically Correct Human Skull (Homo Sapiens Sapiens)
by 3Demon
↓ 12.2k ♥ 1.8k
Twerking Ghostface – Scream if You Like It Thicc
Twerking Ghostface – Scream if You Like It Thicc
by Starlayer Studio
↓ 9.3k ♥ 3.7k
Dummy13 X CloneTrooper Phase 1 & 2
Dummy13 X CloneTrooper Phase 1 & 2
by TroisCentTrenteTrois
↓ 8.9k ♥ 4.6k
All 12 Classes for DnD + Dog - Supportless minis
All 12 Classes for DnD + Dog - Supportless minis
by Nozzleborn Foundry
↓ 8.5k ♥ 2.6k
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection