MakerWorld
Hueforge & Lithophane
Zum Modell
Marvel Daredevil shadow ronin version Hueforge
0
Downloads
1
Likes
0
Makes
My first hueforge attempt based on the Sxeven artwork. This is the “shadow” version which is more grey and there is a more red “devil” version coming soon! Project: Sxeven DD.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 176.61x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Red Transmission Distance: 4 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Blue Gray At layer #13 (1.12mm) swap to Red At layer #18 (1.52mm) swap to Grey At layer #21 (1.76mm) swap to White for the rest.
Frank veröffentlicht auch auf
243 zusätzliche Modelle auf 3 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!