Marvel Jesus

Marvel Jesus Hueforge   I print all of my Hueforge with a .4 nozzle Layered. No AMS/MMU/Ace/CFS/Chroma needed. Just color swap at layer.   Any of my 200 x 200 Frames can be used. Just glue them together.   STLs, Bambu Studio profile, and Anycubic Next profiles are uploaded. Check out my selection of Hueforge. Colors used Black - Elegoo Rapid Black Pla Plus Red -Bambu Matte Scarlet Red Yellow - Babu Basic Yellow White - Elegoo Rapid White Pla Plus   STLs In Bambu Studio or Anycubic Next load all STL's at one time. It will ask “Load these files as a single object with multiple parts?”. Click yes. Then right click on each object and click the color for that object. Or pause at the desired layer height to change colors.   Bambu Studio and Anycubic Next Files Included is the studio print profile file. These files are designed to be used with an AMS/ACE. Commercial License As of 2/25/24 my designs are no longer allowed to be sold commercially. Do you want to sell prints of this model or any of my models? You can purchase commercial licensing at Patreon or Buy Me A Coffee.  Earring Commercial License is just $3 a month. A full commercial license for all of my designs is just $7 a month.   Designers spend a lot of time and money on design! Supporting Patreon's is a small way to help us designers out and show your appreciation for the models. Not just appreciation for what we design but the time and money we put into designing and publishing. Print Instructions Project: Marvel Jesus.hfp Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments Swap